Thank for purchasing an Acewell ATV/Motorcycle/Scooter computer. This
manual is specially designed for the ACE-2956xx series. Each model has 4-6
LED indicators. Different models have different LED indicators; a fuel meter is
optional, but all other functions are the same. You may find that the photo above
has a set of LED indicators different from your computer; the photo is for
reference only.
ATV Computer
FEATURES
SPECIFICATIONS
Power Input: 12VDC.
Speed Sensor: No Contact Magnetic Sensor.
Tachometer Input: CDI or Ignition-coil signal.
Wheel Circumference Setting: 1mm - 3999 mm (1 mm increment)
Operation Temperature: -10
°
C - +80
°
C (inner housing)
Storage Temperature: -25
°
C - +85
°
C (inner housing)
FUNCTIONS
www.acewell-meter.com
Includes analog and digital tachometer, speedometer
(300km/h), trip meter, odometer, clock, average
speedometer, maximum speedometer, riding timer and
cumulative riding timer.
Computer unit has 4-6 built-in LEDs for different
purpose indicators.
LCD has two rows of digital and one analog
bar-graphic tachometer displays, with blue LED
backlight.
Odometer and cumulative riding timer measurements
are stored in memory, even when power is off.
The computer's clock is always on, even when other
functions are power-off.
Universal wheel circumference setting range of
1-3999mm.
Metric/ British system options.
1 Second
1 Minute
9999H59'
0.00'00"- 99:59'59"
Riding Time
Total Time
SPECIFICATIONS
2.3-300KM/h (187.5M/h)
MAX 2.3-300KM/h (187.5M/h)
AVG 2.3-300KM/h (187.5M/h)
0.0-999.9 Km (624.9 Miles)
0 - 999999 Km (0.0- 624999 Miles)
500-12,000 rpm
Bar Tachometer
Odometer
Trip Meter
Maximum Speed Meter
Speed Meter
Symbol
FUNCTIONS
500 rpm
1 Km or Miles
0.1 Km or Miles
0.1 KM/H or M/H
0.1 KM/H or M/H
0.1 KM/H or M/H
INCREMENTS
+/- 50PPM
+/-1% or
+/- 0.1(KPH/MPH)
+/- 0.1%
+/- 0.1%
+/- 50PPM
ACCURACY
Average Speed Meter
+/-1% or
+/- 0.1(KPH/MPH)
+/-1% or
+/- 0.1(KPH/MPH)
TT
RT
ODO
TRIP 1&2
AVG
MAX
Digital Tachometer
RPM
100-19,900rpm
100 rpm
Shift Warning
Maximum Tachometer
MAX
RPM
RPM
100-19,900rpm
100-19,900rpm
100 rpm
100 rpm
Clock
0.00'00"- 24:59'59"
1 Second/1 Minute
+/- 50PPM
INSTALLATIONS & PARTS
Speed Sensor & Magnet Mounting
RPM Sensor Mounting
2.
1.
7.
3.
4.
6.
5.
8.
ACE-2956
Attention
：
1.Align the center of the magnet to
either the sensor marking line
or the end of the sensor.
2.Installing the sensor parallel to
the vibration direction creating
optimal anti-vibration effect.
3.Be sure the gap between the magnet
and the sensor is within 8mm.
Max8mm
Vibration Direction
sensor
Max8mm
Vibration Direction
sensor
Main Unit Mounting
Fixing Screw Nut
Rubber Pad
Washer
Spring Washer
CDI
Ignition Coil
RPM-INPUT
Either One
2-5 Turns
PANEL DESCRIPTIONS
1. Bar Speed Scale 5. RESET Button
2. Bar Speed
6. MODE Button
3. 1st row display: Speedometer, 7. Temp Bar: (optional)
Maximum Speed 8. LED indicator symbols
4. 2nd row display: Other functions .
Left-Direction Indicator/Green
Main-Beam Headlamp/Blue
Right-Direction Indicator/Green
Hazard Warning/ Red
Parking/Green
Direction Indicator/Green
Engine Oil/Red
Neutral Gear/Green
Reverse Gear/Red
Drive Gear/Green
Engine Coolant Temperature/Red
P
D
R
N
Rear Fog Lamp/Amber
Trailer Flashers/Green
Engine "Not In Use"/ Red
BAR RPM: Bar Graphic Tachometer
1. The bar graphic tachometer reading is always displayed at the bar graph.
2. Tachometer bar graphic displays up to 12,000 RPM.
RPM: Digital Tachometer
1. RPM is displayed in 2nd row.
2. Digital tachometer displays up to 19,900 RPM.
3. Tachometer signal picked up from either CDI or Ignition coil.
Shift Warning RPM
1. Function enables you to set up an RPM shift warning.
2. Bar-graphic tachometer flashes when RPM reaches pre-set value, and stops
flashing after you shift gear.
MAX RPM: Maximum Tachometer
1. MAX RPM is displayed on 2nd row.
2. Displays highest tachometer reading achieved after last RESET operation.
SPD: Speed Meter
1. Speed meter display is on 1st row of the screen.
2. Displays speedometer reading up to 300.0 Km/H or 187.5 mph.
MAX: Maximum Speed Meter
1. MAX is displayed on 1st row.
2. Displays highest speed achieved after last RESET operation.
AVG: Average Speed Meter
1. AVG is displayed on 2nd row.
2. Calculates average speed from last RESET.
TRIP 1 & 2: Trip Meter 1& 2
1. TRIP function registers cumulative trip distance from last RESET while bike is
being ridden.
2. Display is on 2nd row of screen.
ODO: Odometer
1. ODO registers cumulative distance traveled during motorbike operation.
2. ODO data is stored in memory, even when power is off.
RT: Riding Timer
1. Calculates total operation time from last RESET.
2. Count automatically begins with vehicle movement.
TT: Total Riding Timer
1. Calculates total operation time from the beginning of bike use.
2. Count automatically begins with vehicle movement.
3. TT data is stored in memory, even when power is off.
12/24 hour Clock
It displays 12- or 24-hour current time.
Fuel Meter (Only for models with the function)
1. Has 7 bargraphic indicator of fuel status.
2. Last bar flashes to indicate low fuel level.
℃ or �
F
:
Temperature Meters
1. It displays -L-℃ or -L- �F when temperature is lower than 0℃ or 32 �F , and
displays-H- ℃ or -H- �F when temperature is over 180℃ or 356�F .
2.
The LCD screen will automatic change to temperature screen and flashes the
digits of temperature when the thermo sensor detects temperature over the
presetting warning temperature; The MODE key is out of function until the
temperature cooling down and lower than the presetting waring temperature.
E
13 10R-022811
1. Signal intensity from ignition coli is dependent on vehicle type.
2. Circles 2-5 turns around ignition coil, with more turns creating steadily
signal, fewer turns creating weaker signal.
3. The computer can use all type of ignition system, only if the RPM is not
stable you must sometimes add the attached 1MOhm resistor in the wire of
the RPM input.
ACE-2956 series User's Manual
H
C
Temperature
0℃-180℃/ 32
℉
- 356
℉
℃ ℉
/
1℃/
℉
± 1℃/
℉