background image

1

Eng

lis

h

Introduction

Product Features

This product is a single-chip DLP

®

 projector, including the following 

outstanding features:

DLP

®

 technology

Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D 

supported

One-touch "3D" button on remote control allows quick and easy access to 

the 3D functions

Acer ColorBoost technology delivers vivid, life-like images

High brightness and contrast ratio

Versatile display modes enable optimum performance in any situation

NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported

Lower power consumption, economy (ECO) mode and EcoPro mode extend 

lamp life

Dynamic Black / ExtremeEco functions help decrease lamp power 

consumption and further extend lamp life.

Dynamic Black: If turned on, the projector dynamically adjusts the power 

consumption of the lamp according to the brightness of the image being 

projected. When projecting darker images the power consumption will 

be reduced and the contrast of the image will also be enhanced.

ExtremeEco: The projector will decrease the power consumption of the 

lamp by up to 70% when no input signal can be detected for 15 minutes.

Acer EcoProjection Technology delivers Intelligent power management 

approach and physical efficiency improvement

Advanced keystone correction delivers optimum presentations

Multi-language Onscreen Display (OSD) menus

Manual focus/zoom projection lens

0.8 ~ 2X digital zoom and pan move function

Microsoft

®

 Windows

®

 2000, XP, 7, 8, 8.1, 10, Vista

®

, Macintosh OS, Chrome 

OS compliant

CEC (Consumer Electronics Control) function supported

LumiSense supported

BluelightShield function supported

Low input lag function helps reduce display input lag

1080p 120Hz supported

Acer Display Widget supported

Compatible with Acer Splash Downloader

Digital Zoom Out (Install) and Image Shift functions allow projected image 

to be shifted toward the direction you choose

Summary of Contents for X1529HP Series




























































Reviews: