![background image](http://html.mh-extra.com/html/acer/veriton-3000/veriton-3000_service-manual_6262098.webp)
66
Chapter 4
Power-on Self-Test (POST)
The power-on self-test (POST) is a BIOS procedure that boots the system, initializes and diagnoses the
system components, and controls the operation of the power-on password option. If the POST discovers
errors in system operations at power-on, it displays error messages on-screen, generates a check point code
at port 80h, or even halts the system if the error is fatal.
What does the POST check for you ?
The main components on the main board that are diagnosed and/or initialized by the POST to ensure system
functionality are as follows:
T
Microprocessor with built-in numeric co-processor and cache memory subsystem
T
Direct Memory Access (DMA) controller (8237 module)
T
Interrupt system (8259 module)
T
Three programmable timers (system timer and 8254 module)
T
ROM subsystem
T
RAM subsystem
T
RTC RAM subsystem and real time clock/calendar with battery backup
T
Onboard serial interface controller
T
Onboard parallel interface controller
T
Embedded hard disk interface and one diskette drive interface
T
Keyboard and auxiliary device controllers
T
I/O ports
T
PS/2-compatible mouse port
T
PS/2-compatible keyboard port
T
Serial ports
T
Parallel ports
T
USB port
Summary of Contents for Veriton 3000
