Acer Veriton 3000, Service Manual

Page: 58 / 140

26 Chapter 2
Product Information
The screen below appears if you select Product Information from the main menu:
The Product Information menu contains general data about the system, such as the product name, serial
number, BIOS version, etc. These information is necessary for troubleshooting (maybe required when asking
for technical support).
The following table describes the parameters found in this menu:
Parameter Description
Product Name Displays the model name of your system.
System S/N Displays your system’s serial number.
Main Board ID Displays the main board’s identification number.
Main Board S/N Displays your main board’s serial number.
System BIOS Version Specifies the version of your BIOS utility.
SMBIOS version The System Management Interface (SM) BIOS allows you to check your
system hardware components without actually opening your system.
Hardware checking is done via software during start up. This parameter
specifies the version of the SMBIOS utility installed in your system.
System BIOS ID Specifies the version ID of the BIOS utility
BIOS Release Date Displays the release date of the BIOS utility.
Product Information
Product Name ....................Veriton 3000
System S/N ......................0000000000000000
Main Board ID ...................S57P
Main Board S/N ..................N/A
System BIOS Version .............V4.0
SMBIOS Version ..................2.3
System BIOS ID ...................R01-C01 EN-
BIOS Release Date ................Feb 10, ‘99