background image

English 5

„

When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and 
uneven surfaces that may cause the product and cart to overturn, damaging equipment or causing 
possible injury to the operator.

„

Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the 
product and protect it from overheating. These openings must not be blocked or covered. (The 
openings should never be blocked by placing the product on bed, sofa, rug, or other similar surface.) 
It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation 
is provided and the manufacturer’s instructions have been adhered to.)
For proper ventilation, separate the product from other equipment, which may prevent ventilation 
and keep distance more than 10 cm.

„

This product should be operated only from the type of power source indicated on the label. If you are 
not sure of the type of power supply to your home, consult your product dealer or local power 
company.

„

This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. 
If you are unable to insert the plug into the outlet, contact your electrician to install the proper outlet. 
Do not defeat the safety purpose of the grounded plug.

„

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items 
placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the 
point where they exit from the product. 

„

For added protection for this product during a lightening storm, or when it is left unattended and 
unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This 
will prevent damage to the product due to lightening and power line surges.

„

Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this 
can result in a risk of fire or electric shock.

„

Never push objects of any kind into this product through openings as they may touch dangerous 
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any 
kind on the product.

„

Do not attempt to service this product yourself as opening or removing covers may expose you to 
dangerous voltages and other hazards. Refer all service to qualified service personnel.

„

Unplug this product from the wall outlet and refer service to qualified service personnel under the 
following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen on the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only 

those controls that are covered by the Operation Manual, as an improper adjustment of other 
controls may result in damage and will often require extensive work by a qualified technician to 
restore the product to its normal operation.

e. If the product has been dropped or damaged in any way.

„

When the product exhibits a distinct change in performance—this indicates a need for service.

„

When replacement parts are required, be sure the service technician has used replacement parts 
specified by the manufacturer or with same characteristics as the original part. Unauthorized 
substitutions may result in fire, electric shock, or other hazards.

„

Upon completion of any service or repairs to this product, ask the service technician to perform 
safety checks to determine that the product is in proper operating condition.

Summary of Contents for PDP 7859

































Reviews: