background image

15

Eng

lis

h

Color

BluelightShield

This function protects your eyes from over-exposure to 
blue light. The options are Off, Low, Medium, and High. 
Choose a preferred setting to reduce the level of blue light 
and get a comfortable viewing experience.

When this function is enabled, LumiSense will be 

automatically set to "Off".

LumiSense

The projector can intelligently optimizes the brightness 
and color saturation of projected image. The feature 
greatly enhances dark detail visibility and color saturation.

Off: For normal mode.

Normal: For enhancing the details in the dark area.

Boost: For boosting brightness of the projected image.

Dynamic Black: automatically optimizes the display of 
dark movie scenes enabling them to be shown in 
incredible detail.

When this function is enabled, BluelightShield will 

be automatically set to "Off".

LumiSense function is unavailable when 3D is set to 

"On" 

Once the ambient temperature reaches 35ºC, this 

function will be turned off automatically. After the 

ambient temperature drops below 32ºC, the 

previous selection will be activated.

Summary of Contents for M459i Series


























































Reviews: