27
English
Note 3: "3D L/R Invert" is only available when 3D is enabled.
Note 4: There has reminder screen if 3D still enable when power on projector.
Please adjust setting depended on your purpose.
Note 5: Functions vary depending on model definition.
Audio
Note:
Functions vary depending on model definition.
Settings
Speaker
•
Choose "On" to play sound through the projector's
speaker. (internal)
•
Choose "Off" to disable projector's speaker. (internal)
Audio Out
•
Choose "On" to play sound through from your audio
amplifier. (external)
•
Choose "Off" to disable the headphone or audio amplifier.
(external)
Mute
•
Choose "On" to mute the volume.
•
Choose "Off" to restore the volume.
Volume
•
Press
to decrease the volume.
•
Press
to increase the volume.
Lamp
Lamp Hour Elapse
Displays the lamp’s elapsed operating time (in hours).
Lamp Hour Reset
Choose "Yes" and press "ENTER"to turn the lamp hour counter to 0
hours.
Lamp Reminding
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Filter
Filter Hour
Show the filter used hour information. When meeting max time
based on selected place, it will pop up a warning message to ask for
replacing filter.
Filter Reminding (Hours)
Default of Replacement Reminder is "Off". Choose other settings to
activate filter replacement reminder after installing 3D dust filter.
Filter Reset
Choose "Yes" to return the parameter to the factory default after
replacing new 3D dust filter.