manualshive.com logo in svg

Acer Extensa Series, User Manual

The Acer Extensa Series, an exceptional product line equipped with top-notch features, delivers superior performance and reliability. Enhancing your experience further, we have made the user manual easily accessible for free, allowing you to download it effortlessly from our website manualshive.com.

Share
Download
background image

Packing the Computer and

Accessories

6-5

1.  Turn off the computer.  Disconnect the AC

adapter from the computer and from the AC
outlet.

2.  Close and latch the display.

3.  Tie up cables using twist ties or rubber

bands.

4.  Enclose peripherals in the bags in which they

were originally shipped. Ensure static-
sensitive items are in anti-static bags.

5.  Place computer, peripherals, documentation,

and floppies in a carrying case.  If you do not
have a carrying case, put the computer in a
briefcase you plan to carry and the other
supplies in luggage you plan to check.

Summary of Contents for Extensa Series

























































































Reviews:

No comments

Related manuals for Extensa Series

Brands by name

Popular brands

Load more brands