2
Engli
sh
Attaching the monitor to the base
1. Unpack the box. Take out the
styrofoam and accessories.
2. Remove upper styrofoam and
monitor's protected bag.
3. Tighten base and stand arm with one
screw.
4. Tighten stand arm and monitor with
one screw, then put in the cover
rubber.
5. Flip the LCD monitor over to make it stand upright on the desk where it will
be used. (Note: Do NOT press the screen to avoid damage any time.)
1. Please use only the NO. 1 Screws (28 mm
x 2 pcs, 17mm x 2 pcs) provided with this
type of installation.
Attaching the monitor on the wall
2. Connect the monitor onto the wall.
Remark
- Please use only the NO.1 Screws (28mmx 2 pcs,17mm x 2 pcs) provided with this
type of installation.
- Please check monitor weight in advance to choose suitable load capacity of VESA
armstand.
Mount
(Not included)
28
Use the 28mm NO.1
Screws x 2
Use the 17mm NO.1
Screws x 2
1
