Acer AT110 Series, User Manual

Page: 98 / 104

Appendix B: LSI RAID configuration 82
LSI MegaRAID SAS 8204ELP RAID
Configuration Utility
This section briefly shows how to create RAID with LSI MegaRAID SAS
8204ELP.
Starting LSI MegaRAID SAS RAID Configuration
Utility
To start LSI MegaRAID SAS RAID Configuration Utility, press <CTRL> +
<H> when you see the RAID BIOS during POST. After POST finished, the
Adapter Selection page will show on the screen. Please click on Start to
launch the configuration menu.
Loading Factory default setting
1 In the Configuration menu, select Adapter Properties. The current
adapter settings appear. Please click on Next to change the
setting.
2 2.Change the setting of Set Factory Defaults from No to Yes then
click on submit.
3 Exit the configuration utility and press <Ctrl> + <Alt> + <Del> to
reboot the server.
Creating a RAID volume
1 Launch the configuration menu.
2 Select Configuration Wizard.
3 Select Add Configuration (default) and click on Next.
4 Select Custom Configuration (default) and click on Next.
5 Select the drives that you want to add into the array with Ctrl key.
After you select the drives, click on Accept DG then Next.
6 Select the RAID Level you want to use, create the logical volume by
specify the size at Select Size and click on Accept to create the
logical volume.
7 After you create the logical volumes on all of the RAID volume,
click on Accept and Yes to save the configuration.
8 Click on Yes to initialize the new logical drives. You will see all the
logical drives listed.