![background image](http://html.mh-extra.com/html/acer/at110-series/at110-series_user-manual_6156035.webp)
19
Turning off the system
There are two ways to turn off the server—via software or via
hardware. The software procedure below applies to a system running
on a Windows OS. For other shutdown procedures, refer to the related
user documentation.
To turn off the system via software:
1
Press <Ctrl> + <Alt> + <Delete> on the attached keyboard or click
Start on the Windows taskbar.
2
Select Shut Down.
3
Select Shut Down from the drop-down menu, then click OK.
To turn off the system via hardware:
If you cannot shut down the server via software, press the power
button for at least four seconds. Quickly pressing the button may put
the server in a Suspend mode only.
Summary of Contents for AT110 Series
