![background image](http://html.mh-extra.com/html/acer/aspire-m1610/aspire-m1610_service-manual_5948053.webp)
Chapter 3
45
Disassembly Procedure
This section tells you how to disassemble the system when you need to perform system service. Please also
refer to the disassembly video, if available.
CAUTION:
Before you proceed, make sure you have turned off the system and all peripherals connected to it.
Aspire M1610/Veriton M261 Disassembly
NOTE:
The only physical difference between the two models is the front bezel as shown in the procedures.
1.
Place the system unit on a flat, steady surface.
2.
Release the Lock-handle then slide the left side door out.
3.
Disconnect the VGA&TV&MODEM card.
Aspire M1610
Veriton M261
Summary of Contents for Aspire M1610
