51
Eng
lis
h
Error messages
If you receive an error message, note the message and take the
corrective action. The following table lists the error messages in
alphabetical order together with the recommended course of action.
If you still encounter problems after going through the corrective
measures, please contact your dealer or an authorized service center
for assistance. Some problems may be solved using the BIOS utility.
Error messages
Corrective action
CMOS battery bad
Contact your dealer or an authorized service center.
CMOS checksum
error
Contact your dealer or an authorized service center.
Disc boot failure
Insert a system (bootable) disc into the floppy drive
(A:), then press <Enter> to reboot.
Equipment
configuration error
Press <F2> (during POST) to enter the BIOS utility;
then press Exit in the BIOS utility to reboot.
Hard disc 0 error
Contact your dealer or an authorized service center.
Hard disc 0
extended type error
Contact your dealer or an authorized service center.
I/O parity error
Contact your dealer or an authorized service center.
Keyboard error or
no keyboard
connected
Contact your dealer or an authorized service center.
Keyboard interface
error
Contact your dealer or an authorized service center.
Memory size
mismatch
Press <F2> (during POST) to enter the BIOS utility;
then press Exit in the BIOS utility to reboot.
