Acer AOD257, Service Manual

Page: 64 / 404

2-10 System Utilities
Figure 2-5. Set Supervisor Password
2.
Type current password in
Enter Current Password
field and press Enter .
3.
Press Enter twice
without
typing anything in
Enter New Password
and
Confirm
New Password
fields. Computer will set
Supervisor Password
parameter to
Clear
.
4. Press F10 to save changes and exit the BIOS Setup Utility .
Changing a Password
0
1.
Use the
↑
and
↓
keys to highlight
Set Supervisor Password
and press Enter . The
Set Supervisor Password
dialog box appears.
Figure 2-6. Set Supervisor Password
2.
Type current password in
Enter Current Password
field and press
Enter .
3.
Type new password in
Enter New Password
field. Retype new password in
Confirm New Password
field.
4.
Press Enter . Computer sets
Supervisor Password
parameter to
Set
.
NOTE: NOTE :
Password on Boot
must be set to
Enabled
to activate the password feature
.
5.
Press F10 to save changes and exit BIOS Setup Utility .
If the verification is OK, the screen will show as follows.
Figure 2-7. Setup Notice
The password setting is complete after the user presses Enter .
If the password entered does not match the current password, the screen shows the
Setup Warning
dialog.
(
Figure 2-8
)