System Utilities
2-63
Using the Crisis Utility Disk
1.
Turn off the target machine and ensure that the AC adapter is plugged in.
Figure 2-108. Ensure the AC Adapter is Plugged In
2.
Plug in the USB flash disk.
Figure 2-109. Plug the USB Flash Disk
3.
Press and hold
<Fn>
and
<Esc>
, and continue with step 4.
Figure 2-110. Hold Down <Fn> + <Esc>
4.
As the
<Fn>
and
<Esc>
keys are pressed, press the
Power
button to turn on the machine.
Wait for 3 ~ 5 seconds to make sure the system fan is in full speed, and then release the
<Fn>
and
<Esc>
keys.
5.
Wait 3~5 minutes for the system to complete the
Crisis
operation. Once complete, the system
will automatically power off.
