![background image](http://html.mh-extra.com/html/acer/altos-g5450-series/altos-g5450-series_user-manual_5827105.webp)
87
Setting a system password
1
Use the up/down keys to select a password parameter (Set
Supervisor Password or Set User Password), then press
Enter
.
A password box will appear.
2
Type a password then press
Enter
.
The password may consist of up to six alphanumeric characters
(A-Z, a-z, 0-9).
3
Retype the password to verify the first entry then press
Enter
again.
4
Press
F10
.
5
Select
Yes
to save the new password and close the Setup Utility.
Parameter
Description
Option
Supervisor
Password Is
This parameter indicates whether a
supervisor password has been assigned.
Clear
Enabled
User Password Is
This parameter indicates whether a user
password has been assigned.
Clear
Enabled
Set Supervisor
Password
Press
Enter
to configure the supervisor password.
Set User
Password
Press
Enter
to configure the user password.
Password On
Boot
Select
Enabled
to activate security check
during POST.
Disabled
Enabled
Summary of Contents for Altos G5450 Series
