Acer AIT-1 SDX-400V, User Manual

Page: 12 / 56

12
1 Drive Mode (ON)
2 Drive Mode (OFF)
3 Drive Mode (OFF)
4 Drive Mode (OFF)
5 Terminator Power (ON)
6 Reserved (OFF)
7 DC Control (1) (ON)
8 DC Control (2) (OFF)
DR (Disaster Recovery * ) Mode
ON
OFF
1 2 3 4 5 6 7 8
* Disaster Recovery Mode is enabled only if VERITAS Backup Exec TM is
running on Windows NT or Windows 2000. In Disaster Recovery Mode,
the drive enters the DR Standby Mode 15 seconds after you insert a
write-protected tape into the drive, and all the drive LED blink. If you
restart the drive while the LED are blinking, it starts as a CD-ROM
device.
For details about the Disaster Recovery Mode, refer to your VERITAS
Backup Exec documentation.
Emulation Mode *
ON
OFF
1 2 3 4 5 6 7 8
* Emulation Mode returns the following in the Product Identification field
of Inquiry of the SDX-400V.
SDX-400C
Data Compression Control DIP switch
Data compression can be selected by DIP switches. Data compression is
enabled while position 7 [DC Control (1)] is ON. Control by host can be
disabled when position 8 [DC Control (2)] is ON.
1 Drive Mode (ON)
2 Drive Mode (ON)
3 Drive Mode (ON)
4 Drive Mode (ON)
5 Terminator Power (ON)
6 Reserved (OFF)
7 DC Control (1) (ON)
8 DC Control (2) (OFF)