manualshive.com logo in svg

Acer AcerNote Nuovo notebook computer, User Manual, Page: 28 / 157

Share
Download
Acer AcerNote Nuovo notebook computer User Manual Download Page 28

                                                                                                                                           

Getting Started

1-11

1.5

Getting Help Online

This user’s manual provides clear and concise information about the
notebook, so read it thoroughly.  To provide you with help when traveling, the
notebook has a comprehensive online help.

Accessing Online Help

Follow these steps to access the online documentation:

1.

Press the Windows logo button or Click on the Start button.

2.

Select Programs.

3.

Click on AcerNote Nuovo.

4.

Select 

Online Manual

.

The online help is easy to navigate with hypertext and hypergraphics.  Clear
illustrations help describe notebook operation as well.

Getting Online

If you are connected to the Internet and have World Wide Web access, visit
our home page (http://www.acer.com/) and get the latest information about
our products, as well as updates on software drivers and utilities.

Summary of Contents for AcerNote Nuovo notebook computer






























































































































































Reviews:

No comments