manualshive.com logo in svg

Acer AcerNote Nuovo notebook computer, User Manual, Page: 24 / 157

Share
Download
Acer AcerNote Nuovo notebook computer User Manual Download Page 24

                                                                                                                                           

Getting Started

1-7

1.2.4

Cleaning and Servicing

When cleaning the notebook, follow these steps:

1.

Close the display lid to turn the notebook off.

2.

Disconnect the AC adapter.

3.

Remove the battery pack.

4.

Use a soft cloth moistened with water.  Do not use liquid or aerosol
cleaners.

Contact your dealer or see your service technician if any of the following
occurs:

•

 

Notebook has been dropped or damaged.

•

 

Liquid has been spilled into the product.

•

 

The notebook does not operate normally.

See section 7.3 for contact information.

1.2.5

Diskettes

Following are some tips on diskette management:

•

 

Always make backup copies of diskettes that contain important data or
program files.

•

 

Keep diskettes away from magnetic fields and sources of heat.

•

 

Avoid removing a diskette from a drive when the floppy drive activity
light is on.

Summary of Contents for AcerNote Nuovo notebook computer






























































































































































Reviews:

No comments