manualshive.com logo in svg

Acer 505 series, User Manual, Page: 43 / 132

Share
Download
Acer 505 series User Manual Download Page 43

21

Right ports  

PC card slot

There is one type II/I or one type III CardBus PC card slot found on the right panel 
of the computer.  This slot accepts credit-card-sized cards that enhance the 
usability and expandability of the computer.

PC cards (formerly PCMCIA) are add-on cards for portable computers, giving you 
expansion possibilities long afforded by desktop PCs.  Popular type II cards 
include flash memory, SRAM, fax/data modem, LAN and SCSI cards.  Common 
type III cards are 1.8-inch ATA drives and cellular modems.  CardBus improves on 
the 16-bit PC card technology by expanding the data path to 32 bits.

ZV (zoomed video) port support allows your computer to support hardware MPEG 
in the form of a ZV PC card.  

Note: Refer to your card’s manual for details on how to install and use the 
card and its functions.

    

#

Icon

Port

Connects to...

1

PC Card slot

16-bit PC Cards and 32-bit CardBus 
PC Cards (ZV support)

2

Modem jack

Phone line (only for models with an 
internal fax modem)

Summary of Contents for 505 series





































































































































Reviews:

No comments