ACEK9 H-RBM, Install Manual

Page: 5 / 8

5
Installation Considerations.
1. The Pager transmits radio signals and should be mounted at least
six inches from other electronic devices.
2. Mount in a dry location.
Step 1 Install Pager Antenna, Follow instructions included with antenna.
Step 2 Plug Antenna into the Pager Transmitter socket marked "ANTENNA".
Socket marked radio is not used.
Step 3 Set antenna switch to “B” for external mounted mast style antennas.
Step 4 Attach the Pager Transmitter's Ground wires to a good Ground.
Step 5 Connect the Pager Transmitter's red power wire to a Battery Hot point. It
is important that the power to the Transmitter is a "Hot at all times" power point
because it transmits each time power is applied.
Step 6 Connect the Pager Transmitter’s Blue Wire
For K9 Hot-N-Pop Pro or K9 Heat Alarm Pro
Connect to the Black/Green (Fan)
trigger wire to activate the Pager. NOTE If the fan kit is being utilized, the fan
and the Pager will share the black/green wire.
For K9 Heat Alarm
Connect to the Green Wire
(Latched)