ACEGER Cruiser Bike, Owner'S Manual

Page: 9 / 28

5
GETTING STARTED
Open the carton from the top and take out the bicycle.
Remove the straps and protective packaging from the bicycle.
Important
Do not discard packing materials until assembly is complete and the
bicycle can work properly. Make sure that no required parts are
accidentally discarded. The bike comes with some plastic pieces to
protect the bike.
1．Install Training Wheels
Remove the adjustment nuts of training wheel.
Attach the training wheel and match bolts with fender holder.
Then reinstall the nut and tighten it with 15mm wrench.Do the same
way to install another training wheel.
NOTE
The 16 inch bike of this model has both training wheels and
kickstand.
The 20 inch bike of this model has only kickstand,no training
wheels.
The 26 inch bike of this model has only kickstand,no training
wheels.