background image

深圳市纵邦科技有限公司

邮        编 :  518100

电话/传真: 86-755-23036551

网        站: www.acebeam.com  

邮        箱: 

[email protected]

深圳市龙华新区大浪街道华韵路300号仪佳扬工业园3栋4楼

Size(mm): 280.85 (length) x 116.0(head dia) x 51(tube dia)

Weight: 1819g(With Battery Pack)

Battery pack x 1; O-ring x 4; Removable handle with cooling fan x 1; 

AC charger x 1; Car charger x 1; Strap x 1; User manual x 1; 

Warranty card x 1; Battery warning card x 1

X70

®

ACE

BEAM

NEW

 THINKING ON LIGHT

User Manual

(English) ACEBEAM X70 User Manual 

Features

Accessories

Technical Parameter

Operation Instruction

Specifications

1. X70是一款高强度照明工具,切勿直射眼睛;

2. 所有操作及护理都需小心谨慎;

3. 推荐使用合格且带有电路保护的电池;

4. 长时间不使用的情况下,请扭松筒身连接处,切断电源。 

1.切勿私自拆卸手电;

2.高强度照明手电需要高电流输出的电池, 为确保能够达到最高输出流明,强

烈推荐使用可充电电池;  

3.请使用优质电池,并在长时间不使用的情况下,请拧下筒身(电池包),放置

阴凉处保存;

4.长时间使用后,若发现防水O圈磨损,请及时更换;

5.请定期清理手电接口处;

6.当手电无法开启,或光束闪烁时,可能有以下几个原因:

   原因1:电池包需充电/更换;

   方法:请及时给电池包充电,或者更换电池包。

    

      

   原因2:PCB电路板或电池接口处脏了;

   方法:请用干净的酒精棉布清理接口处。 

7

.

如若以上操作未解决问题,请参照保修条款并联系当地经销商。

1. 15天保换:ACEBEAM产品自售出日起15天内,在正常使用的情况下,如有

任何质量问题,均可向经销商要求免费更换;

2. 5年免费修期:ACEBEAM产品自售出日起5年内,在正常使用的情况下,如

有任何质量问题,均可享受免费维修服务;

3. 电池类产品和外置风扇保修期为1年,产品附加配件不在保修范围内;

4. 磁吸式充电连接品提供1年质保服务;

5. 本条款不适用于以下情况:

   人为破坏,拆解,改装本产品;

   错误操作导致产品损坏(如电池装反等);

   电池漏液导致产品损坏。

6. 终身有限保修:因不当使用引起的产品损坏,或已超出免费保修时间的产品

中,我司将提供有偿保修,费用以实际更换用为准,不另收取人工费用。

如对ACEBEAM产品有任何疑问,欢迎联系当地代理商或发邮件到

[email protected].

深圳市纵邦科技有限公司有对本说明书内容的最终解释权和修改权。

(简体中文)ACEBEAM X70 使用说明书 

Copyright © 2018 ACEBEAM. All rights reserved.  
Powered by Shenzhen Zenbon Technology Co.,Ltd 

R

O

H

S

售后/保修条款

保养及注意事项

体积

产品特性

性能参数

警告

60000Lumens

单击:

开/关机;

双击:

极亮与已记忆档位循环切换;

长按:

关机未锁机状态下,长按0.5秒开启极低亮档位,极低亮档位不被记忆;

开机状态下:

长按将低 - 中 - 高 - 低档位进行循环;

锁机/解锁:

关机状态下,长按5秒,即锁机;

锁机状态下,长按5秒,即解锁;

爆闪:

单击一次后并长按侧按开关,即进入爆闪;

锁机状态下: 

快速按五下将在泛光+远光,单独泛光 (12xCREE XHP70.2 LED)

单独远光(CREE XHP35 HI LED)中切换。

X70有两种模式:

POWER模式和ECO模式。 快速单击十下将POWER模式与

ECO模式切换:光束闪烁三下,即进入POWER模式;光束闪烁二下,即进入

ECO模式。

(ECO模式为默认模式)

外置电风扇操作步骤

1. 关机状态下,单击开关,即开机;

2. 开机状态下,连续单击开关将1档 - 2档 -1档进行循环;

3. 开机状态下,长按开关,即关机。 

操作步骤

尾部充电指示灯

风扇电量指示灯

头部电量指示灯

Utilizes 12 x CREE XHP70.2 LEDs plus a CREE XHP35 HI LED with a 

lifespan of 50000 hours.

Built-in rechargeable battery pack combining 8x18650 3100mAh 

batteries.

Intelligent highly efficient circuit board design for max performance 

and long run time.

External heat dissipation fan system design for more effective cooling 

of the flashlight body.

Intelligent temperature controlled light output for user safety.

Aircraft grade aluminum body structure with premium type III hard 

anodized anti-abrasive finish.

Ultra-clear tempered glass lens with anti-reflective coating, which 

achieves a 98.3% light transmittance.

Smooth reflector for max light output and maximum highly focused 

beam distance.

Streamlined body design with tactical knurling for firm grip.

Copyright © 2018 ACEBEAM. All rights reserved.  

Powered by Shenzhen Zenbon Technology Co.,Ltd

SHENZHEN ZENBON TECHNOLOGY CO., LTD

Tel./Fax.:           +86-0755-23036551

Official website: www.acebeam.com

Email:                [email protected]

Address: Floor 4th, Building#3, YiJiaYang Industrial Park, Dalang, 

Shenzhen, China, 518100

R

O

H

S

1. X70 is a high intensity lighting device and is capable of causing eye 

damage. Avoid shining the light directly into the eyes to humans or 

animals. 

2. Applications must be treated with caution and handled with care. 

3. Quality batteries with circuit protection will reduce the potential risk.

4. When the X70 

is

 stored in 

a

 backpack or unused for extended period, 

it is suggested to loose

n

 the tube cut off the power entirely to prevent 

the accidental activation of th

e

 

f

lashlight. 

  Do not disassemble the sealed head as doing so may cause damage 

to the flashlight and will void the warranty.

 High-power flashlights need batteries capable of high current output. 

We strongly recommend using Acebeam approved batteries for best 

performance and safety.

 Remove the battery from the flashlight if you will not be using the 

light for an extended period.

•  Replace the O-rings if they become stretched or damaged. Regularly 

lubricate the O-rings.

 Clean the contacts of your light periodically.

There may be several reasons for a flickering or malfunctioning light.

Reason 1: The batteries need to be recharged or replaced.

Solution: Recharge or replace batteries

Reason 2: The PCB board contact or battery contacts are dirty. 

Solution: Clean the contact points with an alcohol soaked cotton swab.

If the above methods do not solve the issue, please contact your 

distributor and refer to the warranty policy.

A

cebeam guarantees the flashlight against defects in material and 

workmanship. Flashlight products that are found to be defective under 

normal use within 5 years of the period of purchase date will be 

repaired or replaced without charge. The battery pack and the External 

Heat Dissipation Fan carry 1-Year warranty.This warranty does not cover 

damage caused by accident, unreasonable use or product alteration. 

Failure to follow the general maintenance directions could result in 

damage to your flashlight that may not be covered by Acebeam  

warranty.

S

hould this flashlight be proved defective, the product will be repaired 

or replaced under the above terms. Please contact Acebeam or your 

original Acebeam dealer for warranty return instructions.

Product Warranty

Usage and Maintenance

X70 can be charged by the equipped AC charger or DC Car charger. 

The built-in power indicator RED means in charging, and GREEN means 

fully charged. 

Charging current is 2.5A, and charging time is 3 hours. 

1. When the indicator is GREEN, the battery is full capacity; 

2. When the indicator is RED, the battery needs to be changed or 

charged. 

W

hen the voltage is below 12V, it is Red light;

When the voltage is below 11.5V, it is Red flash light; 

When the voltage is below 10.5V, it is powered off. 

Warning

Charging Indicator at the tail cap

ON/OFF:

Single click the side switch for ON/OFF 

Change mode: 

When the light is ON, long press the side switch to cycle 

from Low - Mid - High - Low;

Turbo:

 

Every double click to cycl

e

 between Turbo and the memorized level.

Moon light: 

When the light is OFF, long press the side switch for 0.5 

seconds for Moonlight. Moonlight level can not be memorized.  

Strobe: 

Single click and then long press the side switch for Strobe.

When the light is Locked Out: 

quintic click continuously to cycle from 

Flood (12xCREE XHP70.2 LED) +Thrower (CREE XHP35 HI LED),  Flood 

(only),  Thrower (only).   

There are two Modes for X70:

 ECO mode and POWER mode. Every 

10-times click is to cycle between ECO and POWER: Triple beam flicker 

goes to POWER, while Twice beam flicker goes to ECO. (ECO will work by 

default. )

Lock Out / Unlock

Whe

n

 the light 

is

 OFF, long press th

e

 sid

e

 switch 

fo

r 5 second

s

 t

o

 

Loc

k  out;

When the light is Locked Out, long press the side switch for 5 seconds 

to Unlock.

E

xternal Heat Dissipation Fan Operation:

 

1. When the Fan is Shut down, single click the switch to Start up the Fan. 

2. When the Fan is Started up, every single click to cycle between 1st 

gear and 2nd gear.

3.

 

When the Fan is Started up, long press to Shut dow

n

 the Fan. 

配件

采用12颗CREE XHP70.2 LED及1颗CREE XHP35 HI LED,使用寿命50000小时

最高输出可达60000流明。

最远射程可达1115米。

内置一个8x18650 3100毫安可充电电池包。

外置专利风扇,散热效率强。

电量指示灯可显示电池电压。

内置高级智能温控系统,根据工作状态和外界温度自动调节亮度输出,使用安全

智能高效的电路板设计为超高亮度和长的运行时间。

航空级铝合金制造,军工III级硬质阳极氧化表面处理,耐磨更轻更坚固。

超清晰钢化玻璃透镜有防反射涂层,其实现了98.3%的透光率。

镜面光杯,为确保更远距离。

流线型筒身设计,为防滑设计的战术滚花。

尺寸:280.85毫米(长)×116.0毫米(头部直径)×51毫米(筒身直径)

重量:1819克(包括电池包)

ACEBEAM 电池包 x 1, 备用防水O圈 x 4, 外置风扇 x 1, AC充电器 x 1,

车载充电器 x 1,  肩带 x 1, 保修卡 x 1 , 说明书 x 1 , 电池警告卡 x 1

注:

以上数据为1个8xIMR 18650 3100mAh 20A电池包按照国际手电筒测量

标准ANSI/NEMA FL1所述之测量方法,不同电池或使用环境可能会对以上数

据产生影响。

Notice:

 The above-mentioned parameters have been measured in 

accordance with the international flashlight testing standard 

ANSI/NEMA FL1 being tested with a rechargeable battery pack 

(8x18650 batteries), and are approximate and may vary from flashlight, 

batteries, and environments. 

1115米(最远)

311000坎德拉

水下10米

极低亮

中亮

高亮

极亮

低亮

625流明

8000流明

15000~11000流明

3250流明

35000~15000流明

爆闪

10000流明

2小时

40分钟+15分钟

5小时

24小时

3.5小时

2分钟+1小时

       FL1 

S

T

AN

DARD

625流明

8000流明

25000~16000流明

3250流明

60000~18000流明

10000流明

2小时

8分钟+48分钟

55秒+50分钟

5小时

24小时

3.5小时

E

CO

 

Mode

POWER  Mode

1115m (Beam Distance)

311000cd (Peak Beam lntensity)

10 meters Submersible

      FL1 

STANDARD

Turbo

High

  Mid

  Low    Ultra-Low

 Strobe

3.5h

60000~18000

     Lumens

25000~16000

     Lumens

     8000

   Lumens

     3250

   Lumens

     625

   Lumens

    10000

   Lumens

55s+50min

8min+48min

2h

5h

3.5h

24h

EC

O

M

o

d

e

2h

35000~15000

      Lumens

     15000~11000

           Lumens

     8000

   Lumens

     3250

   Lumens

      625

   Lumens

    10000

   Lumens

2min+1h

40min+15min

5h

24h

POWER  Mode

1.当风扇电量指示灯为绿色时,表明手柄内电池有电;

2.当风扇电量指示灯为红色时,表明手柄内电池需要更换;

当电压低于12V时,指示灯为红色;

当电压低于11.5V时,指示灯为红色,并闪烁;

当电压低于10.5V时,自动关机。

X70可用标配AC充电器或车载充电器直接充电。 

红灯说明正在充电;绿灯说明充电完成。 

充电电流为2.5A,充电时间3小时。 

Battery Indicator at the head

High Power LED Searchlight

手柄安装意示图背面可见

Handle installation methods 

are visible on the page back!

External Heat Dissipation Fan Battery Indicator

Reviews: