V2.4
20 |
P a g e
ACE RELIANCE SENSOR OPERATIONS MANUAL
8.
Surface Read-Out Unit Set-up
8.1. Connect a surface cable (from a junction box) and the DC power cable to the ACE Optix SRU.
Figure 35
Power and single wire connections for ACE Optix
8.2 ACE Downhole offers a GPS receiver. If AC mounted in a metallic container
it’s
possible the internal GPS will
not receive a signal, in this case the ACE Optix external GPS receiver may be plugged into the front of the ACE
Optix case as shown in the figure 36 below.
DC power cable
input
Signal cable input
(from a junction
box)
Ground wire
Signal wire
Summary of Contents for Reliance 1K
Page 1: ...V2 4 1 P a g e ACE RELIANCE SENSOR OPERATIONS MANUAL ACE Reliance Sensor Operations Manual...
Page 8: ...V2 4 8 P a g e ACE RELIANCE SENSOR OPERATIONS MANUAL Figure 9 Vise grips Figure 10 Tube cutter...
Page 26: ...V2 4 26 P a g e ACE RELIANCE SENSOR OPERATIONS MANUAL Figure 43 SRU Optix set up menu...
