![background image](http://html1.mh-extra.com/html/ace/ace-3205/ace-3205_installation-and-operation-manual_3887868236.webp)
Chapter
5 Configuring a Typical Application
Installation and Operation Manual
5-6
Cellular Backhaul over PSN and ATM
ACE-3105, ACE-3205 Ver. 5.2
Parameter Value
Out TD
1
OD 1
Configuring an ADSL2+ Router Interface
The router interface in this application is configured over the ADSL2+ interface.
³
To configure the router interface:
•
On the Router Interface configuration menu (Configuration> Applications>
Router> Interface), set the following parameters:
Parameter Value
Number 1
Name ATMoPSN
IP address
192.168.1.1
IP mask
255.255.255.0
Interface type
ADSL2+
Port number
1
VPI
20
VCI
200
LLC/SNAP Encapsulation
Bridged PDU
VLAN tagging
Disable
Management access
Enable
Defining the Remote Peer
The IP address of the remote peer (ACE-3400) has to be set in ACE-3205.
³
To define the remote peer:
•
On the Peer configuration menu (Configuration> Applications> Multi service
over PSN> Peer), set the following parameters:
Parameter Value
Peer number
1
Peer name
Peer-1
Peer IP address
192.168.1.2
Defining a Pseudowire Connection
The pseudowire connection carries 3G/HSDPA traffic over the PSN.