Installation and Operation Manual
Chapter
4 Configuration
ACE-3105, ACE-3205 Ver. 5.2
Configuring for Operation 4-75
Table
4-48. ATM XC Parameters
Parameter Description
Possible
Values
XC type
The XC type; can be either VP or VC.
VP
VC
Default: VC
XC ID
A unique ID for the cross-connection. For example:
VC-1, VC-2, VC-3 (or VP-1, VP-2, VP-3) and so on.
You can manually assign an available number as
the XC ID. Max number of total XCs is 1024.
Up to 9 alphanumeric
characters, case-sensitive
Default: next XC index
Port type
The channel’s port type.
UNI
Abis
ADSL2+
IMA-Group
Port/Group number The channel’s port number.
E1/T1/J1: 1-4/8/16
IMA group: 1-4/8/16
Abis: 1 E1 interface
IMA over SHDSL:
1-5/9/17
VPI
The channel’s VPI.
Note:
•
Must be identical to the one configured for the
port.
•
VP and VC XC with the same VPI on the same
port cannot be configured.
•
Two VP XC with the same VPI on the same port
cannot be configured.
•
Two VC XC with the same VPI/VCI on the same
port cannot be configured.
0–255 for UNI
0–4095 for NNI