Chapter
4 Configuration
Installation and Operation Manual
4-74
Configuring for Operation
ACE-3105, ACE-3205 Ver. 5.2
³
To delete an existing IMA group:
1.
In Group Number, enter the ID number of the group that you want to delete.
2.
Press <R>.
A confirmation message appears: "
Are you sure? (Y/N)
"
3.
Press <Y>.
The IMA group is deleted.
An IMA group cannot be deleted when:
•
An XC is configured for the group
•
The group functions as the System clock.
Configuring the ATM Cross-Connect (XC) Parameters
ATM cross-connects deliver the ATM-based traffic over VC or VP connections.
Each ATM XC is configured individually on the ATM XC menu.
³
To access the ATM XC menu:
•
From the ATM menu (see
), select ATM cross connect (XC).
The ATM XC menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> Applications> ATM> ATM Cross Connect(XC)
1. XC type > (VC)
2. XC ID ... (VC-1)
End Point 1 End Point 2
3. Port type > (UNI) 11. Port Type > (IMA)
4. Port number ... (1) 12. Group number ... (1)
5. VPI ... (0) 13. VPI ... (0)
6. VCI ... (32) 14. VCI ... (32)
7. In TD[0-99999] ... (1) 15. In TD[0-99999] .. (1)
8. Out TD[1-99999] ... (0) 16. Out TD[1-99999] ... (0)
9. OD ... (1) 17. OD ... (1)
10.Congestion control > (None) 18. Congestion control > (None)
>
Please select item <1 to 18>
ESC-previous menu; !-main menu; &-exit
Figure
4-55. ATM XC Menu
Note
