ACE097
Page 9 of 23
Rev Date:3.18.2022
3.
Processor
Location: The processor is found on the motherboard of the server. As shown in the photo
below, the processor is located under the heat sink. The heatsink can look more like a fin type
thermal transfer device, or a rotating fan with a thermal transfer plate. There can be more than
one processor per motherboard.
Type and number of fastenings: Four (4) T30 Torx screws.
Tools required: Screwdriver with T30 Torx bit.
Procedure: Remove the screws as marked in the illustration below. After removing the screws,
lift the processor heatsink module off the processor socket. Unsnap corners A and B, then C and
D of the latch. Push the latch out from the bottom.
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: The CPU does not
contain any printed circuit boards.
