1
English
1
English
-5
When a secondary handle is supplied, ensure it is properly installed and use two
hands to maintain control when operating tool.
PRODUCT SPECIFICATIONS
Model Number
ANC301
Wheel Size
3” (76 mm)
Free Speed
20000 RPM (/min)
Air Consumption
3.4 CFM (96.0 l/min)
Overall Length
7-3/8" (187 mm)
Air Inlet
1/4" NPT
Air Pressure
90 PSI (6.2 Bar)
Air Hose
3/8" (10 mm)
Net Weight
1.9 lbs (0.9 kg)
Noise Level
Model Number
Sound Pressure
Level
(L
P
A)
Sound Power
Level
(L
W
A)
Vibration
Level
ANC301
87.0 dB(A)*
99.0 dB(A)*
3.9 m/sec
2
*
“*” means no load.
INSTALLATION AND LUBRICATION
1.
Make sure the size of air supply lines conforms to tool’s maximum operating
pressure at tool inlet.
2.
Dry the drain from valves at low points of piping, air filter and compressor tank
daily.
3.
Make sure to only connect an air line made of components as shown in the
following diagram.
4.
Before daily use, add a few drops of air tool oil in air inlet.
5.
Make sure the connector couplings and hose have sufficient air flow capacity.
6.
Help prevent connector coupling blockage by lubricating daily.
7.
Make sure the compressed air is clean and dry.
RECOMMENDED AIR SUPPLY SYSTEM
1. Air Compressor
2. Air Filter
3. Regulator
4. Lubricator
5. Air Pipe
6. Air Hose
