background image

WEARING YOUR PEDOMETER

While gently holding the belt clip open, slide the pedometer 

onto your belt or the top edge of your pants or skirt. It should fit 

snugly and level, above one knee. 

Note:

 The pedometer should be as vertical as possible. Walkers 

with larger stomachs may find it helpful to wear the pedometer 

farther back on the body, toward one hip. 

To avoid losing or dropping your pedometer, use the included 

leash and clip to fasten the pedometer securely to your clothing. 

Attaching the Leash: 

Attach the pedometer to the leash by 

looping the leash around the pedometer belt clip. Next, clasp 

the waist-band of your clothing with the attached clip. You can 

also use a safety pin to fasten the leash to your clothing, loop 

the leash through your belt or belt loop or use a badge holder. 

OPERATING INSTRUCTIONS

ACCUSPLIT

, Inc.  •  3090 Independence Drive, Suite 148  •  Livermore, CA 94551 USA

800-935-1996  •  925-290-1900  •  FAX 925-290-1930  •

www.ACCUSPLIT

.com  •  support@ACCUSPLI

T

.com

ACCUSPLIT®

       EAGLE

 

1020

 

Congratulations on taking the first step to wellness with your purchase of an 

ACCUSPLIT pedometer. It’s easy to set up your new pedometer. 

Just follow the steps below, and start walking!

RESETTING YOUR PEDOMETER

Most people prefer to reset step counts daily. To reset:  

Press RESET button to reset to zero. 

REPLACING THE BATTERY

When the display starts to dim or goes blank, it is time to 

replace the battery. Your pedometer uses one Type L1142 

(LR43) 1.5 volt silver oxide battery. To replace: 

1. 

Using a jeweler’s screwdriver or fingernail, gently pry 

 

  battery cover from case, using slot at top of cover. 
2. Pull the old battery gently out of its holder. Replace it with  

  a new battery. The battery’s positive (+) terminal should be  

  FACE UP while you put it into the pedometer.
3. Slide bottom of battery cover back into place, then snap  

  top of cover back into place.

ACCUSPLIT

EAGLE

1020

STEPS

RESET

VIEWING YOUR RESULTS

Once you put on your pedometer, it will automatically 

begin to record your steps. 

First, loop the 

pedometer clip

Next, loop the metal 

clip, then clasp clothing

Or, loop a  

badge holder, then 

 put into pocket

(Badge holder  

not included)

Or, loop a belt or belt loop

NO-PROOF-OF-PURCHASE LIMITED WARRANTY

 

 

See label on back of unit for details, or check

http://support.ACCUSPLIT.com

REGISTER NOW

 

Please return 

your AE1020 Registration to the 
Repair Center address in the 
warranty, and we will let you 
know about future products. 

Email (preferred)
User

970-060

Reviews: