33
4.
Insert the piece’s unit weight in grams using the
CAL
and
MENU
buttons to increase and
decrease the value, while pressing the
TARE
button to pass to the next value. To insert a
decimal point, hold down the
CAL
button for a prolonged time. During the entering phase,
the prolonged pressing of the
TARE
button allows you to delete the inserted value.
5. Press the
button to confirm.
If the piece entered is less than 100 times the resolution of the balance, an error message will
be displayed.
To exit without entering the weight, press the
ON/OFF
button.
6. If the weight is sufficient,
“0”
will be shown on the display; it is now possible to proceed with
the counting, loading the pieces on the plate.
7. To exit from the piece counting function, press the
ON/OFF
button.
It is also possible to use the optional alphanumeric keyboard to insert the average unit weight of
the sample. In this case, carry out the same procedure described above to enter manual
insertion mode.
1. Insert the unit weight in grams of the sample by using the numeric keys from 0 to 9 and the
decimal point.
In case of error, press the
CLEAR
button and restart.
Piece counting
Insert the weight of a sample
01-06-10 13:15:24
0.0230
g
Piece counting 01-06-10 13:15:24
P: 0.0000 g AUW: 0.0230 g
E premere ‘ Print’
Pieces: 0
Piece counting
Insert the weight of a sample
01-06-10 13:15:24
0
g