Accurate Technology ProScale, Operation

Page: 18 / 53

Operation Manual for LCD Digital Readouts Page 18 of 53
Plus (+) & Minus (
–) Keys
Momentarily pressing the
+
or
–
key will increment or decrement the current
displayed value by one unit of measurement. (in, mm, cm or 1/64)
Press & Hold the
+
or
–
key to continue to increment or decrement the
displayed value. The longer the key is pressed, the faster the changes occur.
The
+
&
–
keys may be locked out to prevent accidental entries by using
key lock
and/or
Programming Parameter (Pr3).
Datum Key
Momentarily pressing the
DATUM
key forces the Readout to a user programmed
value. This can be zero or any other displayable value.
Set the
DATUM
key programmed value with
Parameter (Pr1).
Press and Hold the
DATUM
key for 6 seconds to display the battery voltage.
Press and Hold the
DATUM
key for 9 seconds to display the temperature.
The temperature is displayed in “F” or “C” based on the current units setting
(Inch or Metric).
The
DATUM
key may be locked out to prevent accidental entries by using
key lock
and/or
Programming Parameter (Pr3).
Momentarily Press or Press & Hold
Momentarily Press or Press & Hold