Accurate Technology ProScale 950 Series, Operation

Page: 46 / 53

Operation Manual for LCD Digital Readouts Page 46 of 53
Pr21
– NOT USED
Pr22
– ABS/INC Key Operation ··············································· [0 or 1]
This parameter controls the amount of time the
ABS
/
INC
key needs to be
pressed to enter the INCremental measuring mode.
Default Value = 0
Pr23
– Auxiliary Keypad Enable ·············································· [0 to 3]
The parameter controls the operation of the
ABS
/
INC
and
SEND
keys.
Default Value = 3
Pr24
– Special Functions ······················································· [0 to 4]
This parameter controls which Advanced Programming Function is active
Default Value = 0
Pr25
– Special Function Variable ·········································· [
0 to 16]
The parameter may be used by a special function to customize
it’s operation.
See Advanced Programming Function for instances when this parameter is
used.
Default Value = 0
Pr26
– Drift Monitor Tolerance [
.01 mm to 3048 mm] or
[
.001 in to 120 in]
This parameter sets the amount of drift that must occur in MONitor mode to
trigger a drift indication.
Default Value = .01 in
Pr 14 Setting Technology Supported
0 Model 180, 280, 380 and 580 Systems
1 Model 150, 250 and 950 Systems
Pr 22 Setting Key press to enter INCremental mode
0 Press and Hold ABS/INC key (1.2 sec)
1 Momentary depress ABS/INC key (< 1 sec)
Pr 23 Setting ABS/INC and SEND keys
0 Disable Both Keys
1 Enable abs/inc Key only
2 Enable send Key only
3 Enable Both Keys
Pr24 Setting Advanced Readout Function
0 None
1 F3 = MON, F4 = HOLD, F2 = Delete
2 Go/NoGo
3 Measurement Accumulation
4 Statistics