Instruction Manual: Li-Ion C
harger
APLC7S2A8
Note:
Information and contents in this sheet are for reference purpose only. They do not constitute any warranty or representation and are subject to change without notice.
Die Informationen und Inhalte in diesem Blatt dienen nur als Referenz Zweck. Sie stellen keine Gewährleistungen oder Zusicherungen dar, und können jederzeit ohne vorherige
Ankündigung geändert werden.
3/4
INSTRUCTION MANUAL
APLC7S2A8
Rapid charger unit for Lithium-ion and Lithium-polymer rechargeable battery
packs with 7 cells (25.2V or 25.9V)
TECHNICAL SPECIFICATION
Input:
100 – 240V AC 50-60Hz max 0.8A
Worldwide use thanks to wide-range input
Output:
29.4V DC max 2.8A
LED indicator
:
Green: Standby / charge completed
Red:
Battery is charging
Safety Timer: approx. 8 hours
(timer starts automatically when the battery is connected to the charger).
OPERATION OF THE CHARGER
ATTENTION: The charging instructions of the battery manufacturer must be observed!
1. Connect the battery to the charger.
2. Make sure that the polarity of the Battery is correct.
3. Plug the power cord into an outlet.
LED
Indicator:
Red
:
Charging
Green :
Battery fully charged
Flashing:
Error
4. When charging is complete, disconnect the power plug from the outlet and disconnect the battery from
the charger.
Do not charge any other batteries with this charger!