9. Weight function (weight measurement only)
1. Gently step on the monitor,then the monitor will be
automatically turned on.
2. The monitor indicates “0.0 kg”. Now the monitor is
ready to use. Before 0.0 kg appears, please don’t step
on the monitor.
3. Step on the monitor. Remain stationary on the weighing platform and do not hold
you tight.
4. After the monitor levelled-off, your weight will be indicated for approx. 10 seconds
steady. Afterwards the monitor switch-off automatically.
AM_IB_BF1201_EN_SW_v
er1532
IN0WF261000000000
8. Body Analysis
1. Turn the monitor on:
• Press
button to turn on the monitor.
2. Select personal data number:
• Press
or button to select your personal
data number.
3. Set personal data will be successively displayed:
Then "0.0 kg" indicating. The monitor is ready to use and you may now start your
body analysis.
4.
Step onto measurement platform carefully with bare feet on the stainless steel
strips (measuring units) of the monitor and remain stationary.
At first, your weight will be indicated. Then, while the analysis is taking place, the
indication. A few seconds later after completion of the measurement
your measured values (body fat in %,muscle in %,bone mass in kg,body hydration in
%,BMR and BMI) will be shown two times alternately,and then the monitor switch-
off automatically.
10. Error Messages
“LO“
Batteries are used up - Please replace the batteries with the intended
type (3 x AAA).
“Err“
1. Not bare feet for taking body fat measurement.
2. Step off the monitor before body fat analysis procedure complete.
3. Not step onto the electrodes for body fat measuring.
4. The soles of your feet are not clean, e.g. feet perspiration..etc. to
interfere the body fat measurement.
“O-Ld“
The weight exceeds the maximum capacity of 180 kg. Please immedi
-
ately remove the critical load to avoid load cell damage.
“C“
After the monitor indicates“0.0 kg”,move the monitor again.
11. Technical Data
Capacity x graduation:
max. 180 kg x 100 g
Display resolution:
body fat: 0.1%
Body fat:
5.0~75.0%
Body hydration:
5.0~75.0%
Body muscle:
5.0~75.0%
Bone mass:
0.5~22.6kg
Personal memory location:
10 positions
Age:
6 – 100 years
Body height:
80 – 220 cm
Dimensions:
approx. 300 x 300 x 24.4 mm
Batteries:
3 x AAA (included)
Operation Condition:
0~40°C, ≤90%RH
Storage Condition:
-20~60°C, ≤90%RH
*Subject to technical modifications
www.accumed.ch
Warranty Registration (Must be completed within 10 days of purchase)
Customer Name: _________________________________________
Street Address: _____________ City: ________________________
State: ___________________ ZIP code: _____________________
Telephone: _______________ E-mail address: _________________
Gender: Male Female Age:
Product Information
Date of purchase: ________________________________________
Store where purchased: ____________________________________
Price Paid (excl. Tax): ______________________________________
This instrument is covered by a 2 year guarantee from the date of purchase, batteries and ac-
cessories are not included. The guarantee is valid only on presentation of the guarantee card
completed by the dealer confirming date of purchase or the receipt. Opening or altering the
instrument invalidates the guarantee. The guarantee does not cover damage, accidents or non-
compliance with the instruction manual. Please contact your distributors.
6. Unit switch
The monitor displays “0.0” hold button to select your desired unit from “kg”
(kilo gram) to “lb” (pound) or to “st-lb” (stone:pound)
The monitor is ready to use and you may now start your body analysis. Before 0.0 kg
appears, please don’t step on the monitor. Without further activity the monitor will
automatically power-off. Your personal data is stored.
Glass Body Fat Monitor with Scale
Model:
BF-1201
Instruction
Manual
Rossmax Swiss GmbH,
Tramstrasse 16, CH-9442 Berneck, Switzerland
