www.accuenergy.com
V: 1.10 Revised: January 2020
68
AXM-WEB2 for Acuvim II Series Power Meter
•
If extended IO modules are being used, users can click on the detail tab to configure the
digital output and relay outputs to be triggered when an alarm is triggered.
Once all alarm settings are configured, user must click on 'Save' and then reboot the communi
-
cations module in order for the settings to be saved.
Custom Read
The Acuvim II meter supports a custom read function which allows users to customize a block of
registers within the Acuvim II meter using different parameters (i.e. Basic metering, THD, Energy,
etc) as well as different data types for the parameters (i.e. Int, float, etc). There is a total of 64
bytes that users have to create their customized register block.
NOTE:
The Custom Read Function is only available in meters with firmware version 3.51 and
higher.
The window on the left under 'Not Selected' are the list of parameters available for the custom
read block. Users can choose between different parameters by clicking on the drop down menu
under 'Parameter Type'. The available parameter types include:
• Real-Time Metering
• Demand
• Energy
• THD
• Sequence