www.accuenergy.com
63
V: 1.0 Revised: Sept. 2019
Chapter 10: Web Interface Readings and Parameter Settings
AcuCloud
The L-WEB module can directly interface with the Accuenergy Cloud software AcuCloud. The
L-WEB will post data to the cloud software every five minutes.
AcuCloud will require the serial number of the L-WEB module which will then provide a token
that will be used to configure the L-WEB so it can send its data to AcuCloud.
he settings for the AcuCloud post function can be found by clicking on the 'Settings' tab and
selecting 'Communications'. Select 'AcuCloud' to access the settings to configure the L-WEB to
send data to the cloud.
AcuCloud Enable: Select 'Enable' to enable the function and to further configure the settings
related to AcuCloud.
AcuCloud Token: Copy and paste the token provided by the AcuCloud software into this field.
NOTE: The "TEST AcuCloud" button should only be utilized after clicking the 'Save' button
otherwise a fail response will be observed. If a fail response occurs after clicking 'Save', please
