www.accuenergy.com
51
V: 1.0 Revised: Sept. 2019
Chapter 10: Web Interface Readings and Parameter Settings
The L-WEB supports the SMTP protocol where users can setup the email function to enable the
meter to send emails based on a specific time interval or whenever there is an alarm or SOE
event or a combination of both. The Email configuration page can be accessed by clicking on
the 'Email' tab on the settings page. Users must know their SMTP server provider and details
regarding their SMTP server, which can be provided by users' IT personnel.
There are three modes available for sending emails that the user can enable.
The first mode is 'Triggered Sending' where emails are sent immediately when there is a new
alarm, SOE, or waveform event.
The second mode is 'Timed Sending' where users can receive emails at a certain period of
time based on the time interval configured. The email will include the data that is selected to
be sent.
The third mode is when both of the above are enabled.
To use this function the following settings need to be configured:
SMTP Enabled: Select 'Enable' to enable and to further configure the settings related to the
SMTP function.
Start Time to Send Email: Select the date and time for when the emails should begin to send.
Click on the
icon to configure the time and date.
Click on the
icon in the bottom right to clear the time and date.
