V: 1.0 Revised: May. 2019
23
Chapter 6: AcuLink 810 User interface
6.2.1 Modbus-TCP/IP
With the Modbus TCP/IP protocol selected, configure the following fields:
• IP Address:
Enter the IP address of the device
• Port:
Enter the Modbus port of the device
• Modbus ID:
Enter the Modbus address of the device
• Request Timeout:
Enter the timeout setting, default for TCP is 3 seconds
Click 'Submit' once all settings are entered in correctly.
6.2.2 Modbus-RTU
With the Modbus RTU protocol selected, configure the following fields:
Address:
Enter the device address (Modbus Slave ID) of the meter, range is from 1-247
www.
.com
1.800.561.8187
