V: 1.0 Revised: May. 2019
22
Chapter 6: AcuLink 810 User interface
To add a device to the AcuLink 810, you will need to login under Admin access level.
From the left navigation panel, select 'Modbus Device' under the 'DEVICE' menu.
The user will see all the devices that are currently communicating with the gateway on this
page.
Click on 'Add Device'.
•
Provide a name for the Device under the Device Name field
• Enter the Serial Number for the Device
• Select the Model of the Device from the Device Model drop down list
• Enter the Request Timeout from 1-60 sec.
NOTE:
Users cannot add two devices with the same serial number. Each serial number must be
unique for each device.
Select the Protocol
• RTU
- Serial communication via RS485, USB, or AcuMesh
• TCP
- Communication using TCP over Ethernet or WiFi
www.
.com
1.800.561.8187