V: 1.0 Revised: May. 2019
16
Chapter 5: Initializing the AcuLink 810
By default the AcuLink 810 has its WIFI mode set as AP (Access Point) mode, where the
AcuLink 810 acts as a wireless access point allowing other wireless devices to connect
and access the gateway.
To connect to the AcuLink via AP mode, search for the SSID in the list of wireless net-
works.
The SSID will be by default AcuLink810-WIFI-S8Pxxxxxxxx, where the
'
S8Pxxxxxxxx
'
is a
unique serial number of the AcuLink gateway. The serial number of the AcuLink can be
found on the side of the unit. The password for the network is
accuenergy.
5.1.2 Method 2 - Using WIFI to connect to the Meters Web Interface
The web interface of the AcuLink can be accessed by WIFI. Ensure that the WIFI anten-
na is installed on the unit.
D A T A A C Q U S I T I O N S E R V E R
www.
.com
1.800.561.8187
