17
4. User Menu Overview (continued)
4.2 Settings
: Allows the user to configure several functions:
a-
MG: Magnetic detection adjustment
Press VALUE to change the current sensitivity. Press CLR to clear the
current setting, enter the new value, and press OK to confirm the new
one.
MG-0 is OFF / MG-9 is the Maximum / MG-5 default
b-
DD: Size detection adjustment (WIDTH)
Press VALUE to change the current sensitivity. Press CLR to clear the
current setting, enter the new value, and press OK to confirm the new
one.
DD-0 is OFF / DD-9 is the Maximum / DD-5 default
c-
DB: Double Bill detection adjustment
Press VALUE to change the current sensitivity. Press CLR to clear the
current setting, enter the new value, and press OK to confirm.
DB-0 is OFF/ DB-9 is Maximum / DB-5 default
d-
UV- A: Ultraviolet detection FINE adjustment
Used to implement “minor” adjustments in the UV sensitivity. Press
VALUE to change the current sensitivity. Press CLR to clear the current
setting, enter the new value, and press OK to confirm.
UV-0 is OFF / UV-9 is Maximum / UV-5 default
e-
UV- B: Ultraviolet detection COARSE adjustment
Used to implement “drastic” adjustments in the UV sensitivity. Press
VALUE to change the current sensitivity. Press CLR to clear the current
setting, enter the new value, and press OK to confirm.
UV-0 is OFF / UV-9 is Maximum / UV-5 default
