8
3. Operation Description (continued)
3.1 Ultraviolet Verification Operation
Place the bill or document to be analyzed in the WM verification window.
The UV LED light should be activated with the bill or document while
placing it in the inspection area. In case the bill or document does not activate
the UV light, touch the UV control button to turn the UV LEDs ON
manually. The detector has an internal timer to keep the UV LEDs on for 50
seconds before turning them off. If more time is needed to finish the
verification, you can press the UV button.
The UV security features embedded in U.S. dollar bills, foreign currencies,
credit cards, IDs, and other special documents will fluoresce under the UV
light. This will allow the user to visualize them and confirm their
authenticity.
NOTE
: The detector includes a “Security Thread Identification” label that
shows the operator the COLOR and POSITION of the security thread
embedded on the U.S. dollar bills for every specific denomination. Using it as
a reference will help the operator validate them since the COLOR and
POSITION must match.
The verification
window has printed
“AccuBANKER” that
glows under the UV
light to be used as a
comparison reference
during the analysis of
bills, credit cards, or
any other security
document.
