17
8. Software Updates
Steps to perform software update:
Proceed to update the machine's firmware when new bills are launched by the
Central Bank.
1.
Copy the update file into a USB memory. The memory capacity must be
lower than 32GB.
2.
Plug the USB memory into the USB port at the back of the machine.
3.
Press and hold down the yellow key on the control panel then turn ON the
machine then release the key when the message READ USB DISK is
shown.
4.
The screen will show the update file copied on the USB then press the
key ACCEPT.
5.
The screen will show "DOWNLOADING………1" which means the
firmware installation has begun.
6.
The installation is completed when the message "SUCCESS" is shown.
7.
Turn the machine OFF and ON again and resume counting.
