10
Cleaning of the Machine
WARNING: BEFORE DOING ANY CLEANING, TURN THE POWER SWITCH
OFF AND DISCONNECT THE POWER CORD FROM THE MACHINE. KEEP IN
MIND THAT PROBLEMS OR DEFECTS THAT ARISE FROM LACK OF
PERIODIC MAINTENANCE ARE NOT COVERED BY THE WARRANTY.
A)
Cleaning the Optical Sensors
It is important to clean all the sensors to avoid any paper particles or dust
from sticking to the IR transmitter or IR receiver sensors. The IR detectors
may be wiped with a soft cloth soaked with alcohol.
B)
Cleaning the Inside of the Machine Periodically
It is necessary to clean the inside of the machine once a month or when
needed. Unplug the machine and lift the top cover (where the handle lays) to
gain access to the interior.
C)
Additional Recommendations
Avoid operating the machine in a dusty or dirty room. To guard the machine
against the elements, always keep it protected with the supplied cover (when
not in use).
!
