8
Preparing the Lancing Device
For sampling, adjust the depth penetration to reduce the discomfort.
1.
Unscrew the lancing device cover from the body of the lancing device. Insert
a sterile lancet into the Lancing Device and push it until the lancet comes to a
complete stop in the lancing device.
2.
Hold the lancet firmly in the lancing device and twist the safety tab of the
lancet until it loosens, then pull the safety tab off the lancet. Save the safety
tab for disposing used lancet.
3.
Carefully screw the cover back onto the lancing device. Avoid contact with
the exposed needle. Make sure the cover is fully sealed on the lancing
device.
Summary of Contents for VGM06
Page 1: ......
