EXC-100 MICROSCOPE SERIES
73 Mall Drive, Commack, NY 11725 • 631
-864-
1000 •
www.accu-scope.com
9
Fig. 6
Rechargeable Batteries
There are rechargeable batteries at the bottom of the microscope. Open
the battery box to replace the battery
（
see Fig.6
）
.
★
Use the power cord provided with your microscope by ACCU-SCOPE.
If it is lost or damaged, a replacement can be purchased from
ACCU-SCOPE. Always choose a power cord with the same
specifications as the original.
★
Wide voltage range is supported from 100~240V.
★
Connect the power cord appropriately to make sure the instrument is
connected to ground.
ADJUSTMENT & OPERATION
Fig. 7
Illumination
1. Turn on the power by rotating the light adjustment knob
①
and adjust
light intensity by rotating the knob until the illumination is comfortable
for observation.
Rotate the light adjustment knob in clockwise direction to raise the
voltage and brightness.
Rotate the light adjustment knob in counterclockwise direction to
lower the voltage and brightness (see Fig.7).
2. Indicator light is light green when normal use (and batteries are fully
charged), orange light when charging.
Fig. 8
Placing a Specimen
1. Place the slide on the stage with the cover glass of slide
②
facing
upwards and move the specimen to the center (aligned with the center
of objective). Hold the slide in place using the slide-holder
①
(see
Fig.8).
