![background image](http://html.mh-extra.com/html/accu-chek/inform-ii/inform-ii_operators-manual_455945081.webp)
Glucose Control Testing •
4
81
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Performing a STAT test
The meter can be configured to allow a STAT patient glu-
cose test to be run even if the meter is in QC Lockout or
Download Lockout. This option is to be used in situations
with critical patients. The system administrator can allow
control tests to be delayed one to nine times.
Run STAT
appears in the
QC Lockout
warning box under
the following conditions:
■
You are successfully logged in and have selected
Patient Test
from the
Main Menu
.
■
A glucose control test is required (due to specified
control intervals or other conditions).
■
The administrator has enabled the
STAT test
option
during setup.
■
The number of STAT tests available has not been
exceeded.
If these conditions are fulfilled, two buttons appear in the
warning message that allow you to choose the next step:
■
Touch
Run QC
to run the required control test
instead of a patient test.
■
Touch
Run STAT
to perform a patient test even if a
glucose control test is required. The status as STAT
test is stored with the data record for the test.
If the meter is in a
Download Lockout
status, and no
STAT test is available, the meter can be unlocked by a
system administrator (see page 157).
Glucose Test
Patient Test Menu
Run QC
Run STAT
QC Lockout
D-513: Warning! Glucose
control is due. Required
Controls must be run in
order to proceed. 9 STAT
test(s) available.
12:48 pm
03/17/17
Summary of Contents for Inform II
Page 3: ...08424705001 01 2017 04 USA Operator s Manual Version 6 0 A ACCU CCU CHEK HEK Inform II System ...
Page 245: ...245 Notes ...
Page 246: ...246 Notes ...
Page 247: ...247 ...