13
www.acclaimlighting.com
Control cores: 24 AWG / 0.25mm
2
Power cores: 14 AWG / 2.5mm
2
POWER
Power and control are combined within the IP66-rated feed and link cables using a
proprietary design. Neighboring units can be directly connected without need for extra
cables.
The color designations for the optional feed cable are as follows:
Always follow these steps when using Terra Drum cabling:
•
Ensure that the power input is isolated from the mains supply
.
•
At each connection, remove the cover caps from both the socket and plug.
•
Align the orientation marks of the socket and plug, then push them together and twist
the locking collar to lock them fully together.
•
Do not exceed the stated maximum fixtures in a daisy chain - see page 16.
•
At the final fixture in a daisy-chain run, install a terminator (end cap) to seal off the
power bus and also correctly terminate the DMX control feed (see page 14).
•
To release a connection, ensure that the power input is isolated, then twist the locking
collar to release the connection.
IMPORTANT: Ensure that power earth and
DMX GND are both tied to true earth.
