Acclaim Lighting RDS 6, User Manual, Page: 4 / 12

2
www.acclaimlighting.com
INTRODUCTION
WELCOME
Welcome to the
RDS 6
DMX/RDM splitter and optimizer from Acclaim Lighting. This
compact unit features one RDM/DMX input and six outputs, allowing for flexible
configuration of your RDM/DMX signal. Each port is electrically isolated to ensure you get
the maximum total run of 3,900’ for each signal line and voltage spikes are prevented from
reaching other outputs or the connected controlling device.
SAFETY
•
Ensure that the power input is supplied from a correctly fused, earthed and
environmentally protected location.
MAINTENANCE
CAUTION: Always isolate mains power before starting maintenance operations.
•
Ensure that all mounting (and device) screws/bolts are fully tight and free of corrosion.
•
Ensure there is no deformation to the housing, lenses or fixing points.
•
Check that all power supply cables are free from physical damage or material fatigue.
•
Use only genuine spare parts supplied by Acclaim Lighting.
CLEANING
•
Use a moist, lint-free cloth when cleaning each fixture.
•
Never use alcohol or solvents.
SAFETY, MAINTENANCE AND CLEANING